TS500 metal detector

Function brief introduction
This product is a new genegration of metal detector with the adoption of the latest technology. It is a professional-type probe of  greater detection depth and accurate recognition.  , especially suitable for deep stratigraphic exploration operations.

In the use of old-style metal detectors, the most annoying problem is the impact of the ground. As the distance between the disk and the grond changes, the signal of the equipment will also change. If the disk detect the rough ground surfaces, the change will be even bigger. The operator seems to hear sound signals everywhere  and is not able to identify where the real buried metals are. This phenomenon is called "mineralization reaction." The causes of  "mineralization reaction" are the  structure of the soils and the signals caused by various of minerals.  iIn a place with complex soil structure, "mineralization reaction"is very , and signal will be  even more significant than the metal signals, then the operator would be difficult to identify between the "mineralization reaction" and signals casued by buried metals.

This apparatus equipped with balance lines, is able to  remove all "mineralization reaction" effect, only react when the metal plate encountered with metals, thereby greatly improved the depth and accuracy of detection.

The size of the apparatus is equipped with two detection plates. Under normal circumstances, such as soil conditions in the interior, or more complicated place, can use the small probe set for conventional detection. Under conventional detection , It can work steadily and distinguish accurately, and has strong anti-interference ability. In exceptional circumstances, such as in the field of homogeneous soil, or the targets are buried deeply,  you can use the large probe to deepen the detection depth. But the apparatus with greater detection depth is susceptible to clutter interference .


Specification parameters