Handheld metal detectors >> CT-900 Hand-held metal detectors  
 

Product introduction: 

This product is widely used in airports, industrial zones, government buildings, schools, hospitals, meeting places, sports, etc. necessary to carry out safety inspection of all places. Whenever the detected metals, the detector will be issued to the sound reproducing apparatus. Sensitivity sufficient to detect the 25 cents coins. Larger objects measured tone long hair; measured objects smaller¶ÌÒôhair. In addition, can also be used rechargeable nickel-based batteries as a power supply separated. And charge detector of the machine. (Should be matching dedicated charger) .

Product features:
  • Red LED display: Press when the light-emitting instructions;
  • drop-min button: when pressed, enables the detection of metal detector sensitivity by about 50%. Therefore, can be used to detect floor with large number of steel bars under or detect large metal
  • headphone jack: can be used when the results only need to be known to the users.

Technical specifications:

  • Sensitivity: ¦µ2.0mm Ball
  • Power Supply: 9 volt battery (6F22ND)
  • Operating frequency: 13KHz
  • Power consumption: 270mW
  • Current job: less than 60mA
  • Operating temperature: -10 ¡æ -50 ¡æ
  • Net Weight: 400g
  • Size: 410 * 80 * 40mm
  • Packing Size: 520 * 330 * 460mm (30 support / box)

Additional Description:
Rechargeable headset and access (sharing a headphone port connector)

¡¾Back¡¿¡¾Print this page¡¿ ¡¾Close¡¿
 
 
   
Home  |  Products  |  About MCD  |  News Center  | ICP 08031238
Copyright © 2009 MCD ELECTRONICS (H.K.) CO. All Rights Reserved.